DIY Recycled Leather Belt Wood Shelf

What should we do for the abandoned leather belt? Let’s make a recycled leather belt wall-mounted shelf.

The recycled leather belt wood shelf

Material & Tools

  • 2 x board (12.5cm x 76cm)
  • 2 x old leather belt(if there is no old leather belt, a little thick woven belt and vegetable tanned leather are fine.
  • carpet nail/nail
  • hammer
  • ruler
  • pencil

the material and tools

Making Instructions:

  1. Firstly, use pencil and ruler to mark the position and cross.
    use pencil and ruler to mark the position and cross
  2. Fasten two leather belts, the length of the leather belt is 150cm for each of them. If the length of two leather belt are same, so another leather belt need to be punched and fasten well again.
    fasten two leather belts
  3. The bottom need to be fixed with three nails.
    the bottom need to be fixed with three nails
  4. Both sides need to be fixed with nails.
    both side need to be fixed with nails
  5. The second board need to be fixed with nails.
    the second board need to be fixed with nails
    the second board need to be fixed with nails - 2
  6. It has been completed in the main, but it’s better not to put heavy articles on the upper board.
    basically completed
  7. Fasten it to the wall, is has been finished.
    fasten it to the wall

The more ideas of recycling for the abandoned leather belt, please visit Tips: How Can I Recycle Old Leather Belts